Dismantling And Rinsing The Dual Spout - Jura ENA Micro 9 One Touch Instructions For Use Manual

k T Press the Rotary Switch to start cappuccino
frother cleaning.
CLEANER FOR CAPPU.
T Remove the milk pipe from the receptacle
with milk.
T Fill a receptacle with 250 ml of fresh water
and add 1 capful of milk system cleaner.
T Immerse the milk pipe in the receptacle.
T Place another receptacle under the dual
spout.
c T Press the Maintenance button.
, the milk system and the pipe
CLEANING
are cleaned.
The operation is interrupted,
CAPPUCCINO
T Rinse the receptacle thoroughly, fill it with
250 ml of fresh water and immerse the milk
pipe in it.
T Empty the receptacle under the dual spout
and place it back underneath.
c T Press the Maintenance button.
, the milk system and the pipe
CLEANING
are rinsed with fresh water.
The operation stops automatically.
READY

Dismantling and rinsing the dual spout

The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene. Your ENA will not prompt you to clean the
dual spout.
T Remove the milk pipe and rinse thoroughly
under running water.
micro 9
WATER FOR
.
T Press the releasing devices and pull the dual
spout down and off.
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If a lot of
milk residue has dried on, first soak the
individual parts in a solution of 250 ml of
cold water and 1 capful of JURA milk system
cleaner and then rinse thoroughly.
T Fit the air intake pipe.
de
5 Maintenance
en
fr
it
nl
es
pt
ru
49