Descaling The Water Tank; Cleaning The Bean Container - Jura ENA Micro 9 One Touch Instructions For Use Manual

T Place a receptacle under the hot-water
spout.
c T Press the Maintenance button.
DE-SCALING
hot-water spout repeatedly.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
FILL WATER TANK
T Empty the receptacle and place it under the
dual and hot-water spout.
T Remove the water tank, rinse thoroughly,
fill with fresh, cold water and reinsert.
PRESS RINSE
c T Press the Maintenance button.
DE-SCALING
dual and hot-water spout.
The operation is interrupted,
.
TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
READY
E If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.

Descaling the water tank

Limescale deposits may form in the water tank.
To ensure correct function of the machine, descale
the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge,
remove it.
T Descale the tank with a mild conventional
descaling agent in accordance with the
manufacturer's instructions.
T Rinse the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge,
reinsert it.
T Fill the water tank with fresh, cold water and
reinsert it.
, water flows out of the
, water flows out of the
EMPTY

Cleaning the bean container

Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These traces may negatively affect the coffee
result. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
T Disconnect the mains plug.
T Remove the bean container cover.
T Remove the coffee beans with a vacuum
cleaner.
T Clean the bean container with a soft, dry
cloth.
T Fill the bean container with fresh coffee
beans, then close the bean container cover.
de
5 Maintenance
en
fr
it
nl
es
pt
ru
53