Disassembling, Inspecting And Reassembling Lubrication System; Disassembling And Inspecting Oil Pump; Measuring Clearance Between Outer Rotor And Inner Rotor - Mitsubishi S3Q2 Service Manual

2. Disassembling, inspecting and reassembling lubrication system

2.1 Disassembling and inspecting oil pump

Disassembling sequence
1 Oil strainer
2.2 Measuring clearance between outer rotor
and inner rotor
Measure the clearance between the outer rotor and the inner
rotor. If measured value exceeds the limit, replace the oil
pump with new one.
Item
Clearance between outer
rotor and inner rotor
Gear defect, wear
Replace
Disassembling and inspecting oil pump
2 Oil pump cover
Standard Limit
0.13 to 0.15 mm 0.20 mm
[0.0051 to 0.0059 in.] [0.0079 in.]
3
2
1
3 Oil pump
Measuring clearance between outer rotor and inner
rotor
LUBRICATION SYSTEM
9-5