Installing Rocker Shaft Assembly; Adjusting Valve Clearance - Mitsubishi S3Q2 Service Manual

4.8 Installing rocker shaft assembly

(1) Install the valve caps to the valve heads.
(2) Tighten the long bolts of the rocker bracket to the
specified torque.
(3) Tighten the short bolts of the rocker bracket.

4.9 Adjusting valve clearance

Adjust the valve clearance.
For adjusting procedures, refer to "Adjustment and
Operation."
REASSEMBLY OF BASIC ENGINE
Installing rocker shaft assembly
Adjustment screw
Lock nut
Adjusting valve clearance
Tightening torque
long:
15 ± 2 N·m
{1.5 ± 0.2 kgf·m}
[11 ± 1.4 lbf·ft]
short:
11.3 ± 1.5 N·m
{1.15 ± 0.15 kgf·m}
[8 ± 1.1 lbf·ft]
7-15