Configuring Roce On The Adapter For Windows Server - Qlogic QL45212 User Manual

6–Configuring RoCE

Configuring RoCE on the Adapter for Windows Server

7. Configure the DCBX protocol (CEE in this example).
Dell(conf)# interface twentyFiveGigE 1/8/1
Dell(conf-if-tf-1/8/1)# protocol lldp
Dell(conf-if-tf-1/8/1-lldp)# dcbx version cee
8. Assign a VLAN ID to the switch port to match the VLAN ID assigned to the
adapter (5).
Dell(conf)# interface vlan 5
Dell(conf-if-vl-5)# tagged twentyFiveGigE 1/8/1
Configuring RoCE on the Adapter for Windows
Server
Configuring RoCE on the adapter for Windows Server comprises enabling RoCE
on the adapter and verifying the Network Direct MTU size.
To configure RoCE on a Windows Server host:
1. Enable RoCE on the adapter.
a.
b.
Open the Windows Device Manager, and then open the QL45212
NDIS Miniport Properties.
Select Network Direct Functionality from the Property menu, and
then select Enabled in the Value field. Click OK.
54 BC0154503-00 C