Sansurfer Hba Install Wizard (Windows 2000/Server 2003); Introduction; Installing The Driver; Found New Hardware Wizard Dialog Box - Qlogic QLA200 HBA User Manual

SANsurfer HBA Install Wizard (Windows 2000/Server 2003)

3.1

Introduction

The SANsurfer HBA Install Wizard does the following:
Installs the QLA200 HBA driver for Windows 2000/Server 2003 operating
■
systems
Updates the QLA200 HBA driver for Windows 2000/Server 2003 operating
■
systems
Performs diagnostics on the QLA200 HBA and its attached devices
■
section 3.5)
The SANsurfer HBA Install Wizard is on the SANsurfer Fibre Channel HBA Software
CD-ROM (CD), and can be run from the CD at any time. To run the wizard from the
server (optional), see the instructions in
3.2

Installing the Driver

If you have installed the QLA200 HBA in a Windows 2000/Server 2003 operating
system, follow these instructions to launch the SANsurfer HBA Install Wizard, which
installs the HBA driver automatically.
NOTE
FL0054601-00 B
(see section 3.2)
(see section 3.3). (To remove the driver, see
When the system is powered on, the Microsoft Found New
Hardware Wizard dialog box (plug-and-play installation process)
may display
dialog boxes if more than one QLA200 HBA is installed in the
system. Click Cancel in each dialog box.
Figure 3-1. Found New Hardware Wizard Dialog Box
Section 3
section
(see figure 3-1). Click Cancel. You may have multiple
section 3.4.)
3.2.
(see
3-1