STACKED ISO MOUNT RADIO PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Slide the appropriate bracket into the trim
plate aligning the holes in the trim plate to
the clips on the bracket. (Figure A)
2
Slide the stacked ISO DIN units into the trim
plate bracket assembly and secure the units
to the kit using the screws supplied with
the head units. (Figure B)
3
Aura, Cobalt, G5, HHR,
Sky and Vue only:
Cut and remove top mounting tabs on
each side of the Radio Housing.
Continue to final assembly.
95-3302 KIT ASSEMBLY
14
A
B
C