Ddin / Stacked Iso Din Radio Provision - Metra Electronics 95-1003 Installation Instructions Manual

DOUBLE DIN / STACKED ISO DIN
*
Note: Refer also to the instructions included with the aftermarket radio.
1 Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2 Clip the brackets into the sides of
the DDIN trim plate. (Figure A)
3 Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly
and secure to the assembly using
the screws supplied with the radio.
(Figure B)
4 Reassemble dash in reverse order
of disassembly.
95-1003 KIT ASSEMBLY
HEAD UNIT PROVISION
A
B
7