Iso Mount Radio Provision With Pocket - Metra Electronics 99-5816 Installation Instructions Manual

ISO MOUNT RADIO PROVISION WITH POCKET

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Mount the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure A)
2 Slide the radio into the radio housing
until it snaps into place. (Figure B)
3 Snap the trim plate onto the front of
the Radio Housing. (Figure B)
4 Snap the Pocket into the radio
housing. (Figure C)
Continue to final assembly.
99-5816 KIT ASSEMBL Y
5
A
B
C