Iso Mount Radio Provision With Pocket - Metra Electronics 99-7423 Installation Instructions Manual

ISO MOUNT RADIO PROVISION WITH POCKET

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Mount the ISO Brackets to the radio
with the screws supplied with the
radio. (Figure A)
2 Slide the radio into the radio housing
until it snaps into place. (Figure B)
3 Attach the radio housing trim plate
supplied with the kit to the assembly.
(Figure B)
4 Snap the pocket into the assembly.
(Figure C)
Continue to final assembly.
99-7423 KIT ASSEMBL Y
4
A
B
C