Stand Mode Timeout Period - Datalogic QD 2300 QuickScan L Quick Reference Manual

Stand Mode Timeout Period

The Timeout Period for the transition from low power to sleep
mode can be set to one of the following durations:
• 1 Hour
• 5 Hours (default)
• Infinite Timeout — With this setting, there is no timeout,
thus the scanner will never go into sleep mode or beam
shut-off but will remain in low power mode until a label is
read.
4
Stand Mode Timeout Period = 1 Hour
Stand Mode Timeout Period = 5 Hours (Default)
Stand Mode Timeout Period = Infinite Timeout
TM
QuickScan L