Specifications - Power Fist 8699159 User Manual

8699159
4-1/2 in. Metal Cutting
Band Saw

SPECIFICATIONS

Horsepower
Voltage Rating
Current Rating
Frequency Rating
Blade Speeds
Cutting Capacity
Angle Cutting (Left)
Saw Blade
INTRODUCTION
Accurately cuts workpieces up to a 4 x 6 in. cross-section. The Band Saw has a
three speed motor to cut everything from brass and aluminum to rugged alloy
and tool steels. The saw has a two position rocker switch with a safety lock. The
mitre plate on the horizontal cutting bed has a range of 0° to 55°. The Band Saw
includes the Saw Blade and mobile stand.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
2
4-1/2 in. Metal Cutting Band Saw
Round Steel
Rectangular
Diameter
Thickness
Width
Tooth Pitch Range
1 Hp
120V
6.5A
60Hz
80, 120 and 200 ft/min
4-1/2 in.
4 x 6 in.
0 to 55º Mitre Plate when Horizontal
64-1/2 in.
0.025 in.
1/2 in.
14 teeth per inch
For technical questions call 1-800-665-8685
V4.1