Color Balance; Display Timeout; Display Orientation; Fans - Chauvet Intimidator Trio User Manual

Color Balance

Display Timeout

Display
Orientation

Fans

Reset

Load Factory
Defaults

System Info

Intimidator Trio User Manual Rev. 1
To set the color balance, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Color Balance.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select RED, GREEN, BLUE, or WHITE.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to increase or decrease the color value (100–255).
9. Press <ENTER>.
10. Repeat steps 6-9 until the desired color balance is set.
To select whether the display backlight should turn off after inactivity, follow the
instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Display.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To set the display orientation on the Intimidator Trio, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Screen Rev.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To set the fan speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Fans.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Auto or Full.
7. Press <ENTER>.
To restart the Intimidator Trio, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Reset.
5. Press <ENTER>.
To reset the Intimidator Trio to factory default settings, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Factory Set.
5. Press <ENTER>.
To view system information, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Sys Info.
3. Press <ENTER>. The version number, running mode, DMX address, and current
product temperature will show on the display.
Page 21 of 27