Pan/Tilt Orientation; Pan/Tilt Angle Range; Pan/Tilt Speed; Dimmer Curve - Chauvet Intimidator Trio User Manual

Pan/Tilt
Orientation
Pan/Tilt Angle
Range

Pan/Tilt Speed

Dimmer Curve

Dimmer Speed

Page 20 of 27
To select whether the Intimidator Trio will operate with normal panning or inverted
panning, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To select whether the Intimidator Trio will operate with normal tilting or inverted tilting, do
the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To select which pan angle range to use, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 540, 360, or 180.
7. Press <ENTER>.
To select which tilt angle range to use, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 240, 180, or 90.
7. Press <ENTER>.
To set the pan/tilt speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select P/T Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Normal, Fast, or Slow.
7. Press <ENTER>.
To set the dimmer curve, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Curve.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Square, I Squa, sCurve, or Linear.
7. Press <ENTER>.
To set the dimmer speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Fast or Smooth.
7. Press <ENTER>.
Intimidator Trio User Manual Rev. 1