Table of Contents
Advertisement
3. S
ETUP
AC Power
Fuse
Replacement
Power Linking
Power Linking
Diagram
Page 8 of 27
The Intimidator Trio has an auto-ranging power supply and it can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product's power
requirements (circuit breaker, power outlet, and wiring), use the current value listed on
the label affixed to the product's back panel, or refer to the product's specifications chart.
The listed current rating indicates the product's average current draw under normal
conditions.
·
Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk
of electrocution or fire.
·
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
1.
Disconnect the product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove the blown fuse.
4.
Replace with a fuse of the same type and rating.
5.
Screw the fuse holder cap back in place and reconnect power.
·
Disconnect the product from the power outlet before replacing the fuse.
·
Always replace a blown fuse with another of the same type and rating.
The product provides power linking via the IEC outlet located in the back of the product.
Please see the diagram below for further explanation.
You can power link up to 4 Intimidator Trio products on 120 VAC or up to 8
Intimidator Trio products on 230 VAC.
The power linking diagram corresponds to the North American version of the
product ONLY! If using the product in other markets, you must consult with the
local Chauvet distributor as power linking connectors and requirements may
differ in your country or region.
1st Product
2nd Product
3rd Product
Other products
Intimidator Trio User Manual Rev. 1
Advertisement
Table of Contents
