Table of Contents
Advertisement
Power connector cable
Description
DC-in power connector
Before removing the power connector cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Base enclosure (see
c.
Display assembly (see
d.
Speakers (see
Remove the power connector cable:
1.
Disconnect power connector cable (1).
2.
Remove the cable from the base enclosure clips (2).
3.
Lift the power connector from the base enclosure (3).
Reverse this procedure to install the power connector cable.
54
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
29), and then remove the following components:
Optical drive on page
Base enclosure on page
Removing the display on page
Speakers on page
53).
30).
33).
51).
Spare part number
806746-001
Advertisement
Table of Contents
