Table of Contents
Advertisement
4.
Remove the hinges from display enclosure (4).
Remove the display panel cable:
1.
Disconnect display panel cable from webcam (1).
2.
Remove cable from routing clips on display enclosure (2).
3.
Remove tape cover display panel cable connector (3).
4.
Disconnect the display panel cable from the TouchScreen (4).
Remove the WLAN module antenna cable:
1.
Release the WLAN transceiver (1).
CAUTION:
component, use only gentle pressure when removing them from the enclosure.
2.
Release the antenna cable from the routing clips on the right side of the enclosure (2).
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The transceiver are attached to the display enclosure with adhesive. To avoid damaging the
Advertisement
Table of Contents
