Table of Contents
Advertisement
Display assembly (TouchScreen) (select models only)
Description
Display enclosure in blizzard white finish
Display enclosure in cobalt blue finish
Display enclosure in natural silver finish
Display enclosure in peachy pink finish
Display enclosure in sunset red finish
Display enclosure in violet purple finish
Display cable
Display cable top
Display hinges
Display panel — AntiGlare, FHD
Display panel — BrightView, HD
IMPORTANT:
and replacement.
Before disassembling the display panel, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Base enclosure (see
c.
Display assembly (see
Remove the display panel from the top enclosure:
1.
Using a case utility tool, carefully separate the panel from the display enclosure (1).
CAUTION:
Doing so could damage the webcam and other components.
Make special note of each screw and screw lock size and location during removal
Battery on page
Optical drive on page
Base enclosure on page
Removing the display on page
Do not insert the case utility tool or other device at the top of the bezel near the webcam.
29), and then remove the following components:
30).
33).
51).
Component replacement procedures
Spare part number
807377-001
807374-001
806752-001
807375-001
806829-001
807376-001
810963-001
811584-001
809112-001
806767-001
811079-001
61
Advertisement
Table of Contents
