Table of Contents
Advertisement
USB Connector board
NOTE:
The connector board spare part kit includes the connector board cable.
Description
Connector board with cable (Intel Pentium)
Connector board with cable (Intel Core)
IMPORTANT:
and replacement.
Before removing the connector board, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Base enclosure (see
Remove the connector board:
1.
Disconnect the connector board cable (1).
2.
Disconnect the power button board cable (2).
3.
Remove the two 2.5×3.7 screws (3) that secure the connector board to the keyboard/top cover.
4.
Lift connector board away from computer (4).
Reverse this procedure to install the connector board.
Make special note of each screw and screw lock size and location during removal
Battery on page
Optical drive on page
Base enclosure on page
29), and then remove the following components:
30).
33).
Component replacement procedures
Spare part number
809109-001
809108-001
41
Advertisement
Table of Contents
