Table of Contents
Advertisement
Left side
Component
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
6
Chapter 2 External component identification
Power connector
AC adapter/battery light
RJ-45 (network) jack/status lights
USB 2.0 port
Memory card reader
USB 3.0 port
Optical drive eject button
Optical drive
Description
Connects an AC adapter.
●
White: The AC adapter is connected and the battery is fully
charged.
●
Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.
●
Amber: The AC adapter is connected and the battery is
charging.
●
Off: The battery is not charging.
Connects a network cable.
●
White: The network is connected.
●
Amber: Activity is occurring on the network.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.
Reads optional memory cards that enable you to store, manage,
share or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the slot, and then push in on the card
until it is firmly seated.
To remove a card:
Press in on the card until it pops out.
▲
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.
Releases the disc tray.
Depending on your computer model, reads an optical disc or
reads and writes to an optical disc.
Advertisement
Table of Contents
