Table of Contents
Advertisement
Memory module
Description
8 GB
4 GB
2 GB
Before removing the memory, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Base enclosure (see
Remove the memory:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
CAUTION:
components on the memory module.
2.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install the memory module.
Battery on page
Optical drive on page
Base enclosure on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
29), and then remove the following components:
30).
33).
Component replacement procedures
Spare part number
693374-005
691740-005
691739-005
37
Advertisement
Table of Contents
