Speakers
Description
Speakers
Before removing the speakers, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Base enclosure (see
c.
Display assembly (see
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Disconnect the speaker cable from the clips on the base enclosure (2).
3.
Lift the speakers away from the base enclosure (3).
Reverse this procedure to install the speakers.
Battery on page
29), and then remove the following components:
Optical drive on page
30).
Base enclosure on page
Removing the display on page
33).
51).
Component replacement procedures
Spare part number
806755-001
53