Usb/Power Connector Board - HP Compaq Presario,Presario F500 Maintenance And Service Manual

USB/power connector board

Description
USB/power connector board (includes USB/power connector board)
Before removing the USB/power connector board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Remove the USB/power connector board:
Remove the two Phillips PM2.5×5.0 screws (1) that secure the USB/power connector board to the
1.
computer.
Release the USB/power connector board as far as the USB/power connector board (2) cable will
2.
allow.
Battery on page 29).
Hard drive on page 30)
Optical drive on page
Keyboard on page 40)
Switch cover on page
Display assembly on page
Top cover on page 49)
36)
38)
44)
Component replacement procedures
Spare part number
431445-001
53