Changing The Password; Disabling The Password Function - BenQ W3000 User Manual

Home cinema series
Table of Contents

Advertisement

Changing the password

To do this, first and foremost, you have to access the Advanced OSD menu (see
the OSD Menus" on page 33
1.
Open the OSD menu and go to the System Setup: Advanced > Password >
Change password menu.
2.
Press OK. The message 'INPUT CURRENT PASSWORD' displays.
3.
Enter the old password.
If the password is correct, another message 'INPUT NEW PASSWORD'
displays.
If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT CURRENT PASSWORD' displays for
your retry. You can press BACK to cancel the change or try another password.
4.
Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.
Confirm the new password by re-entering the new password.
6.
You have successfully assigned a new password to the projector. Remember to enter
the new password next time the projector is started.
7.
To leave the OSD menu, press BACK.

Disabling the password function

To disable password protection, go back to the System Setup: Advanced > Password
> Power on Lock menu after opening the OSD menu system. Select Off by pressing
◄/►. The message 'INPUT PASSWORD' displays. Enter the current password.
i. If the password is correct, the OSD menu returns to the Password page with
Off show in the row of Power on Lock. You will not have to enter the
password next time you turn on the projector.
ii. If the password is incorrect, the password error message displays lasting for
three seconds, and the message 'INPUT PASSWORD' displays for your retry.
You can press BACK to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should you
ever need to re-activate the password function by entering the old password.
42
Menu Functions
for details).
"About

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents