If You Forget The Password; Entering The Password Recall Procedure - BenQ W3000 User Manual

If you forget the password

If the password function is activated, you will be asked
to enter the six-digit password every time you turn on
the projector. If you enter the wrong password, the
password error message as pictured to the right
displays lasting for three seconds, and the message
'INPUT PASSWORD' follows. You can retry by
entering another six-digit password, or if you did not record the password in this manual,
and you absolutely do not remember it, you can use the password recall procedure. See
"Entering the password recall procedure" on page 41
If you enter an incorrect password 5 times in succession, the projector will automatically
shut down in a short time.

Entering the password recall procedure

1. Press and hold AUTO on the projector or remote control for 3 seconds. The
projector will display a coded number on the screen.
• Under the Advanced OSD menu
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode the number. You may be
required to provide proof of purchase documentation to verify that you are an
authorized user of the projector.
for details.
• Under the Basic OSD menu
Menu Functions 41