Table of Contents
Advertisement
Menu Functions
About the OSD Menus
To let you make various adjustments or settings on the projector and the projected image,
the projector is equipped with 2 types of multilingual On-Screen Display (OSD) menus:
•
Basic OSD menu: provides primary menu functions. (See
on page
•
Advanced OSD menu: provides full menu functions. (See
menu" on page
To access the OSD menu, press MENU on the projector or remote control.
The first time you use the projector (after finishing the initial setup), one of the following
Basic OSD menu overviews displays, depending on whether or not any video signal is
connected.
•
Input signal connected
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow
the instructions below:
Use the arrow keys (▲/▼/◄/►) on the projector or remote control to move through the menu
items, and use OK to confirm the selected menu item.
•
When there is a video signal connected to the projector
i. Go to the Settings > Menu Type menu.
ii. Use ▲/▼ to select Advanced and press OK.
iii. Press MENU again to access the Advanced OSD menu.
•
When there is NO video signal connected to the projector
35)
39)
•
No input signal connected
"Using the Basic OSD menu"
"Using the Advanced OSD
Menu Functions
33
Hide quick links:
Advertisement
Table of Contents
