Table of Contents
Advertisement
If you forget the password
If the password function is activated, you will be
asked to enter the six-digit password every time
you turn on the projector. If you enter the wrong
password, the password error message as pictured
to the right displays lasting for three seconds, and
the message 'INPUT PASSWORD' follows. You can
retry by entering another six-digit password, or if
you did not record the password in this manual, and you absolutely do not remember
it, you can use the password recall procedure. See
procedure" on page 29
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.
Entering the password recall procedure
1.
Press and hold AUTO on the projector or
remote control for 3 seconds. The projector
will display a coded number on the screen.
2.
Write down the number and turn off your
projector.
3.
Seek help from the local BenQ service
center to decode the number. You may be
required to provide proof of purchase
documentation to verify that you are an authorized user of the projector.
Changing the password
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security
Settings.
2.
Select Change Password and press MODE/ENTER. The message 'INPUT
CURRENT PASSWORD' displays.
3.
Enter the old password.
•
If the password is correct, another message 'INPUT NEW PASSWORD'
displays.
•
If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT CURRENT PASSWORD' displays for
your retry. You can press MENU/EXIT to cancel the change or try another
password.
4.
Enter a new password.
IMPORTANT: The digits being input will display as asterisks on-screen. Write your
selected password down here in this manual in advance or right after the password
is entered so that it is available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.
Confirm the new password by re-entering the new password.
6.
You have successfully assigned a new password to the projector. Remember to
enter the new password next time the projector is started.
for details.
"Entering the password recall
Operation
29
Advertisement
Table of Contents
