Shutting Down The Projector - BenQ W3000 User Manual

Shutting down the projector

1. To turn the projector off, press
remote control to turn projector off directly.
Or you can press
projector and a warning message appears.
Press
2. Once the cooling process finishes, the
POWER indicator light is a steady orange
and fans stop.
3. Disconnect the power cord from the wall socket if the projector will not be used in
an extended period of time.
• To protect the lamp, the projector will not respond to any commands during the cooling
process.
• To shorten the cooling time, you can also activate the Quick Cooling function. See
Cooling" on page 54
• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector, the fans will run for a few minutes to cool down. Press POWER again to start
the projector after the fans stop and the POWER indicator light turns orange.
• Lamp life results will vary depending on environmental conditions, and usage.
POWER on the
POWER again.
for details.
on the
"Quick
Menu Functions 57