System Setup : Basic Menu - BenQ W3000 User Manual

System Setup : Basic menu

Submenu
3D Sync Mode
Background Color
Splash Screen
Projector Position
Auto Off
Direct Power On
Menu Settings
Source Rename
Auto Source Search
Functions and Descriptions
Select DLP-Link or 3D VESA for DLP-Link or 3D VESA glasses.
Sets the background color when there is no signal to the projector.
Allows you to select which logo screen displays during projector start-up. You can
choose BenQ logo screen, Blue screen, or Black screen.
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 16
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 63
When the function is set to On, the projector will be turned on automatically
once the power is fed through the power cable. When the function is set to Off,
you'll have to turn on the projector by pressing
the remote control.
• Menu Type
Switches to the Basic OSD menu.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Blank Reminder Message
Sets whether the reminder message is displayed by the projector while the image
is hidden.
Renames the current input source to your desired name.
On the Source Rename window, use ▲/▼/◄/► to set the desired characters
for the connected source item.
When done, press OK to save the changes.
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it acquires a
signal. If the function is set to Off, the projector will select the last used input
source.
for details.
for details.
on the projector or
Menu Functions
on
53