Controls And Functions - BenQ W3000 User Manual

Controls and functions

Projector
1
2
3
4
5
6
7
8
1. FOCUS ring
Used to adjust the projected image
appearance. See
and clarity" on page 32
2. Zoom slide lever
Used to adjust the projected image
appearance. See
and clarity" on page 32
3. LENS SHIFT adjuster
Used to adjust the projector len left, right,
up or down. See
lens" on page 19
4. POWER indicator light
Lights up or flashes when the projector is
under operation. See
68 for details.
5. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 43
details.
6. ◄ Left/ Decrease volume level
Decreases volume.
7. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page 29
and "Shutting down the projector" on page
57 for details.
8. BACK
Goes back to previous OSD menu, exits and
saves menu settings.
"Fine-tuning the image size
for details.
"Fine-tuning the image size
for details.
"Shifting the projection
for details.
"Indicators" on page
for
9. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high. See
9
68 for details.
10
10. Keystone/Arrow keys (
11
Manually corrects distorted images
12
resulting from an angled projection.
13
See "Correcting keystone" on page 32
14
details.
15
11. LAMP indicator light
16
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
details.
12. AUTO
Automatically determines the best picture
timings for the displayed image.
13. ► Right/
Increases volume.
When the On-Screen Display (OSD) menu
is activated, the #6, #10, #13, and #16 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See
menu" on page 39
14. OK/MODE
Selects an available picture setup mode.
Confirm the selected On-Screen Display
(OSD) menu item. See
Advanced OSD menu" on page 39
details.
15. MENU
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
Advanced OSD menu" on page 39
16. Keystone/Arrow keys (
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32
details.
"Indicators" on page
/▲ Up)
"Indicators" on page 68
Increase volume level
"Using the Advanced OSD
for details.
"Using the
"Using the
for details.
/▼ Down)
Projector features
for
for
for
for
11