Making Copies; How To Copy; Stop Copying - Brother MFC-J200 Basic User's Manual

9

Making copies

How to copy

The following steps show the basic copy
operation.
a
Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF on page 20.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
on page 21.)
b
Press (COPY).
The LCD shows the default copy
settings:
1
1 Copy Ratio
2 Quality
3 No. of Copies
Use the dial pad to enter the number of
copies.
NOTE
The default setting is FAX mode. You can
change the amount of time that the
machine stays in COPY mode after the
last copy operation.
(See Advanced User's Guide: Mode
Timer (MFC model).)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Mono Start or Colour Start.
2 3

Stop copying

9
To stop copying, press Stop/Exit.
9
9
9
43