Brother MFC-J200 Basic User's Manual page 74

Error Message
No Paper Fed
No Response/Busy
Not Registered
66
Cause
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
The paper tray was not fully inserted. Remove the paper tray and re-install
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Jam Clear Cover is not closed
correctly.
The paper is jammed in the machine. Remove the jammed paper by
The number you dialled has not
answered or is busy.
You tried to access a Speed Dial
number that has not been stored in
the machine.
Action
Do one of the following:
 Refill the paper in the paper tray,
and then press Mono Start or
Colour Start.
Remove and reload the paper,

then press Mono Start or
Colour Start. (See Loading
paper and other print media
on page 11.)
it until it locks into place, and then
press Mono Start or Colour Start on
the control panel.
Clean the paper pick-up rollers.
(See Advanced User's Guide:
Cleaning the paper pick-up rollers.)
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
Printer jam or paper jam on page 71.)
following the steps in Printer jam or
paper jam on page 71.
If this error occurs often during
2-sided printing, the paper feed
rollers may be stained with ink. Clean
the paper feed rollers.
(See Advanced User's Guide:
Cleaning the paper feed rollers.)
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed Dial numbers
on page 41.)