Brother MFC-J200 Basic User's Manual page 15

9
5
5 Telephone keys:
 Redial/Pause
Redials the last number called. It also
inserts a pause when dialling.
 Hook
Press before dialling when you want to
listen to make sure a fax machine has
answered, and then press Mono Start or
Colour Start.
Also, press this key after picking up the
handset of the external telephone during
the F/T pseudo/double-ring.
6 Start keys:
 Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in color or mono
depending on the scan setting in the
ControlCenter software).
 Colour Start
Lets you start sending faxes or making
copies in full color. Also lets you start a
scanning operation (in color or mono,
depending on the scan setting in the
ControlCenter software).
* If the other party only supports
monochrome fax, your machine will
send the fax in monochrome.
8 7
6
7 Power On/Off
Press
Press and hold down
machine. The LCD will show Shutting Down
and will stay on for a few seconds before
turning off.
If you have connected an external telephone or
TAD, it is always available.
If you turn off the machine using
periodically clean the print head to maintain
print quality. To prolong the life of the print
head, provide better ink efficiency and
maintain print quality, you should keep your
machine connected to the power at all times.
8 Stop/Exit
Stops an operation or exits the menu.
9 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
10 Fax Auto/Manual
Lets you quickly change the Recive Modes to
Fax Auto mode or Fax Manual mode when
in fax mode.
(See Receive Modes on page 26)
General information
to turn on the machine.
to turn off the
1
, it will still
7