Making Copies; Copy Options; Stop Copying; Improving Copy Quality - Brother MFC-J650DW Advanced User's Manual

7

Making copies

Copy options

You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings 1 minute after
copying.
Press Copy, and then press Options. Press
a or b to scroll through the copy settings.
When the setting you want is displayed, press
it and choose your preferred option.
When you have finished changing the
options, press OK, and then press
Black Start or Color Start.
NOTE
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again. (See Setting
your changes as the new default
on page 53.)
• You can save some of the options you use
most often by setting them as a Shortcut.
(See Saving copy options as a Shortcut
on page 54.)
• The Ink Save Mode
Thin Paper Copy
Watermark Copy
supported by technology from Reallusion,
Inc.
1
MFC-J870DW and MFC-J875DW only

Stop copying

To stop copying, press
42
1
,
1 1
, Book Copy and
1
features are
.

Improving copy quality

7
You can choose the copy quality. The factory
setting is Normal.
NOTE
If you choose Normal or Fast, you can
only choose Plain Paper in
Paper Type.

Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images,
such as photographs. This provides the
highest resolution and slowest speed.

Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
a
Load your document.
b
Press
c
Enter the number of copies you want.
d
Press Options.
e
Press a or b to display Quality.
f
Press Quality.
g
7
Press Normal, Best or Fast.
h
Press OK.
i
If you do not want to change additional
settings, press Black Start or
Color Start.
(Copy).
7
7