How To Scan To A Computer; Before Scanning; Scanning A Document As A Pdf File Using Controlcenter4 (Windows ® ) - Brother MFC-J200 Basic User's Manual

11

How to scan to a computer

Before scanning

To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
 Install the scanner drivers from the CD-ROM. (See Quick Setup Guide: Install MFL-Pro Suite.)
Configure the machine with a TCP/IP address if network scanning does not work.

(See Software and Network User's Guide.)
Scanning a document as a PDF file using
ControlCenter4 (Windows
(For detailed information, see Software and Network User's Guide.)
NOTE
• The screens on your PC may vary depending on your model.
• This section is based on using the Advanced Mode of ControlCenter4.
ControlCenter4 is a software utility that lets you quickly and easily access the applications you use
most often. Using ControlCenter4 eliminates the need to manually launch specific applications.
a
Load your document. (See How to load documents on page 20.)
b
®
(Windows XP, Windows Vista
Open ControlCenter4 by clicking
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
®
(Windows 8)
Click (Brother Utilities), and then click the drop-down list and select your model name
(if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4. The ControlCenter4 application will open.
46
®
)
® ®
and Windows 7)
(Start)/All Programs/Brother/MFC-XXXX (where
11
11
11