Using Receive Modes - Brother MFC-J200 Basic User's Manual

Using Receive Modes

Mode
Fax(Fax Auto)
F/T (Fax/Tel)
TAD (External TAD)
Mnl (Fax Manual)
1
If the caller wants to send a fax during a call or the caller sends you a fax call, please press Mono Start or Colour
Start (under easy mode) on the control panel of the machine or press l 51 keys on the external answering phone
device (you have to turn on the remote codes first, see Using remote codes on page 38) to give fax receiving signals.
Function Help
Each call Factory setting of Ring Delay is 4 (0-10 times available,
recognized as fax see Ring Delay on page 28 ). After ringing 4 times, the
and send fax signal. fax machine send fax-receiving signals automatically;
However, you can
Tip: If your machine is connecting an external answering
answer the call
phone device, and often use it to answer incoming calls,
within the number of
you could set the ring time through 4 to 6 times.
rings.
Within the recommended ringing times, you can use the
external answering phone device to answer and talk.
Automatically Factory setting of Ring Delay is 4 (0-10 times available,
determine whether see Ring Delay on page 28.
the incoming call is
According to incoming call after the fax machine rings 4
telephone or fax
times:
calls.
1) For the fax call, send fax received signal;
Non-Fax call will 2) For the telephone call, make a fast double-ring,
make a fast double- waiting for you answer the phone.
ring to inform you
Tip: If your machine is connecting an external answering
answer the phone.
phone device, you could set the ringing time through 4 to
6 times to answer the call.
The external Use this mode if you have connected an external
answering machine answering machine to your machine. The TAD setting
(TAD) works only with an external answering machine.
automactically
Note: Ring Delay does not work in this setting.
answers every call.
Voice messages
are stored on the
external TAD. Fax
messages are
printed.
Machine doesn't Answering the call, or if the caller wants to send you a
recognize each call, fax, press Mono Start or Colour Start (under easy
only as a common mode) to receive faxes.
phone call that you
Tip: If your machine is connecting an external answering
need to determine
phone device, you can use the external answering
after answering the
phone device to answer and talk.
phone.
Receiving a fax
1
1
5
1
5
27