Recommended Print Media; Handling And Using Print Media - Brother MFC-J200 Basic User's Manual

Chapter 2

Recommended print media

To get the best print quality, we suggest using
the Brother paper in the table.
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.
We recommend using 3M Transparency Film
when you print on transparencies.
Brother paper
Paper Type
A4 Plain
A4 Glossy Photo
A4 Inkjet (Matte)
10  15 cm Glossy
Photo
Handling and using print
media
 Store paper in its original packaging and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
 Avoid touching the shiny (coated) side of
the photo paper. Load photo paper with
the shiny side facing down.
 Avoid touching either side of the
transparency paper because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
18
2
Item
BP60PA
BP71GA4
BP60MA
BP71GP
2
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
1 2 mm or greater curl may cause jams
to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Short grain paper
Paper capacity of the output paper
tray cover
Up to 50 sheets of 80 g/m
 Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
1
2
2
A4 paper.