Stop Faxing; Setting Scanner Glass Size For Faxing; Color Fax Transmission; Cancelling A Fax In Progress - Brother MFC-J200 Basic User's Manual

Chapter 4
e
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass
 If you pressed Mono Start, the
machine starts scanning the first
page. Go to step f.
 If you pressed Colour Start, the
machine starts dialling and sending
the document.
f
When the LCD asks you Next Page?,
do one of the following:
To send a single page, press 2 to

choose No(Dial) (or press
Mono Start again).
The machine starts sending the
document.
 To send more than one page, press
1 to choose Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
h
After all the pages have been scanned,
press 2 or Mono Start to start.

Stop faxing

To stop faxing, press Stop/Exit.
24
Setting scanner glass size for
faxing
4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a
Load your document.
4
b
Press
c
Press Menu, 3, 2, 0.
d
Press a or b to choose Letter (or A4).
Press OK.
e
Press Stop/Exit.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
NOTE
This setting is only available for sending
documents from the scanner glass.

Color fax transmission

Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine's
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).

Cancelling a fax in progress

4
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
(FAX).
4
4
4