Brother MFC-J200 Basic User's Manual page 63

Hide thumbs Also See for MFC-J200:
Table of Contents

Advertisement

e
Each color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
f
Gently push the back of the ink
cartridge—marked PUSH—until the
cartridge lever lifts, and then close the
ink cartridge cover.
g
The machine will automatically reset the
ink dot counter.
Routine maintenance
NOTE
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it is a brand new one (for
example, Did You Change Blck?).
For each new cartridge you installed,
press 1 (Yes) to reset the ink dot counter
for that color. If the ink cartridge you
installed is not a brand new one, be sure
to press 2 (No).
• If the LCD shows No Ink Cartridge or
Cannot Detect after you install the ink
cartridge, check that the ink cartridge is a
brand new Brother Original cartridge and
that it is installed correctly. Remove the
ink cartridge and reinstall it slowly and
firmly until the cartridge lever lifts.
IMPORTANT
• DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
• DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
• If you mix the colors by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
• Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
• DO NOT dismantle or tamper with the ink
cartridge; this can cause the ink to leak out
of the cartridge.
A
55

Advertisement

Table of Contents
loading

Table of Contents