Mounting Or Removing Seat; Mounting Or Removing Arm Support - Vermeiren Squod Instruction Manual

Hide thumbs Also See for Squod:
Table of Contents

Advertisement

2.6

Mounting or removing seat

L L L L
WARNING:
Risk of injury - Make sure that the seat
using the wheelchair.
To remove the seat from the electric wheelchair:
1. Pull the front side of the seat
bushings
.
2. Slide the seat
to the front.
3. Lift the seat
out the seat frame.
2.7

Mounting or removing arm support

L L L L
WARNING:
Risk of injury and/or damage - Make sure that the levers
properly tightened before using the wheelchair.
L L L L
WARNING:
Risk of tipping over - Check that the armpads are at the same height
on each side.
L L L L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the arm supports.
The arm supports can be removed so the patient can be moved sideways. The arm supports
can also be removed for therapeutic purposes and to move the patient from the wheelchair.
The armpads are adjustable in different heights over a range of 90 mm (stepless) Keep a
safe distance from 10 mm on the bottom of the arm support.
1. Loosen the lever
2. Move the rectangular tubes
3. Retighten the lever
4. Check that the lever
5. Adjust the other armpad with the same instructions.
upwards, until the seat hooks
To mount the arm supports on the electric wheelchair:
3. Mount the arm support
4. Retighten the handle
is not in a good position, press on button
handle and place the lever
risk of injury to the hands can appear.)
To remove the arm supports from the electric wheelchair:
4. Turn on the handle
of handle
on the handle and place the lever
position that no risk of injury to the hands can appear.)
5. Remove the arm support
a little.
and
over each other until the desired armpad height.
hand-tightened.
is securely attached.
Page 12
is properly attached before
To mount the seat
electric wheelchair:
1. Place the seat hooks
between the two bushings
, on each side.
2. Push the seat
backside downwards.
in the rectangular tube
properly. (If the lever of handle
in a good position that no
until it come loose. (If the lever
is not in a good position, press on button
out the rectangular tube
Squod
2013-09
to the
on the
come out the two
are
.
on the
in a good
.

Advertisement

Table of Contents
loading

Table of Contents