Table of Contents
Advertisement
To unfold the backrest:
1.
Pull gently on the back strap.
2.
Pull to the backrest until it clicks into position.
3.
Be sure that both safety pins
2.8
Back inclination
Make sure that the backrest is on both sides placed in the same position for the
comfort of the patient.
The angle of the back can be adjusted from 90° - 13 0° .
2.9
Mounting or removing the seat frame
L L L L
WARNING: Risk of injury – Check that the seat frame clicks in the two front hooks
while mounting.
L L L L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the seat frame.
The mounting of the seat frame is done as follows:
click in the holes of the backrest adjustment plate.
Angle of back
90°
100°
110°
120°
130°
Table 3: Angle of backrest
1.
Pull on the back strap Ⓑ until the locking
pins Ⓒon both sides come out the hole of
the backrest Ⓐ.
2.
Push or pull the backrest forward or
backwards until the desired angle.
3.
Check that the locking pins Ⓒ are
securely fixed.
Page 13
Navix
2012-04
Position on
backrest plate Ⓐ Ⓐ Ⓐ Ⓐ
Hole 1
Hole 2
Hole 3
Hole 4
Hole 5
Advertisement
Table of Contents
