Combination Switch; High-Beam Flasher; High-Beam Headlamps; Night Security Illumination - Mercedes-Benz 2009 CL-Class Operator's Manual

lamps should only be used in conjunction with
low-beam headlamps. Consult your State or
Province Motor Vehicle Regulations
regarding permissible lamp operation.
X
Switch on the ignition.
X
Turn the exterior lamp switch to position
or ( Y page 316).
C B
X
Switching on front fog lamps: Pull out the
exterior lamp switch to first stop.
The green indicator lamp
¥
exterior lamp switch comes on.
X
Switching on rear fog lamp: Pull out the
exterior lamp switch to second stop.
The rear fog lamp, the front fog lamps and
the yellow indicator lamp
†
exterior lamp switch come on.
X
Switching off front fog lamps/rear fog
lamp: Push in the exterior lamp switch to
its stop.
Locator lighting and night security
illumination
The locator lighting and night security
illumination are described in the COMAND
vehicle menu section under "Locator lighting
on/off" ( Y page 217) and "Setting night
security illumination" ( Y page 216).

Combination switch

in the
High beam
1

High-beam flasher

2
in the
High beam
X
Turn the exterior lamp switch to position
( Y page 316).
B
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
in the instrument cluster comes on.
A
X
Switching off: Pull the combination switch
in direction of arrow
position.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.

Turn signals

Turn signals, right
1
Turn signals, left
2
X
Press the combination switch in direction
of arrow
The corresponding turn signal indicator
lamp
cluster flashes.
to its original
2
The combination switch resets automatically
after major steering wheel movements.
i To signal minor directional changes such
as changing lanes, press combination
Controls in detail
Lighting
or 2.
1
or in the instrument
L K
Z
319