Mercedes-Benz 2009 CL-Class Operator's Manual page 163

X
Use the mobile phone (see mobile phone
operating instructions).
or
X
®
Use the Bluetooth headset (see headset
operating instructions).
®
i The use of a Bluetooth headset requires
®
Bluetooth to be activated and the
®
Bluetooth headset to be authorized
( Y page 180).
If you have accepted the call using COMAND,
the telephone keypad, the multifunction
steering wheel or the mobile phone, the call
will be conducted via the hands-free system.
The volume of the call can be adjusted
( Y page 88).
If you have accepted the call using the
®
Bluetooth headset, the call will be
conducted via the headset.
Further operating functions can be found in
the "Functions during a single-call
Y
connection" section ( page 163).
You can also accept a call if the COMAND
display is showing a screen other than the
telephone mode screen. After accepting the
call, you will see the caller's data in a window.
X
Closing window: Slide
qmr
press n.
Making an outgoing call
i If you place an outgoing call and receive
a busy signal, the telephone automatically
starts to redial as long as the provider and
the mobile phone support this function (see
mobile phone operating instructions).
While the call is connecting, you can also
send character strings ( Y page 163).
Entering the telephone number using
the COMAND controller
X
Switching screen to telephone mode:
Call up main telephone menu
( Y page 157).
X
Entering digits: Select desired digits by
rotating or sliding
ymz omp
press n.
X
Deleting individual digits: Select
briefly press n.
X
Deleting an entire telephone number:
Select and press and hold n until the
)
telephone number is deleted.
X
Connecting a call: Select S.
Entering a telephone number using the
or or
omp
telephone keypad
X
Switching screen to telephone mode:
Call up main telephone menu
( Y page 157).
X
Use telephone keypad to enter digits.
i A detailed description of how to enter
digits using the telephone keypad can be
found on ( Y
X
Connecting a call: Press s.
Redial
X
Switching screen to telephone mode:
Call up main telephone menu
( Y page 157).
X
Use COMAND controller to select S.
or
X
Press
and s
( Y page 154).
The list of dialed numbers appears. The
and
)
most recently dialed number is at the top.
X
Select desired entry.
X
Connecting a call: Press n.
i
If the list of dialed calls contains no
entries, the
Control systems
COMAND telephone
page 154).
on the telephone keypad
menu item cannot be
S
161
Z