Mercedes-Benz 2009 CL-Class Operator's Manual page 165

Functions during a single-call
connection
Example illustration: Telephone mode during a call
Symbol for active telephone
°
1
connection (also visible in other operating
modes)
Signal strength display
2
To switch hands-free microphone on or off
3
Length of call display
4
To send character strings
5
To end a call
6
Person you are calling
7
i The name of the person you are speaking
with can only be seen in display
her telephone number and name have been
saved in the COMAND address book or
phone book on the mobile phone. The
telephone number must also be saved in
the same way in which the person you are
talking to transmits it.
Switching the hands-free microphone
on or off
X
Switching screen to telephone mode:
Call up main telephone menu
( Y page 157).
X Switching off microphone: Select Mic
OFF and press n.
or
X
Press shortcut button.
F
If the microphone is switched off, the
symbol appears in the main area.
X Switching on microphone: Select Mic
ON.
or
X
Press shortcut button.
F
The symbol disappears.
>
Sending a character string via DTMF
i This function is not possible with every
if his or
7
mobile phone. If the mobile phone supports
the function, you can use it during the call
connection and also during a call.
COMAND telephone
Answering machines or other devices can be
controlled by character strings (e. g. for
remote query functions).
Sending character strings via the DTMF
menu
X During a call, select DTMF.
The DTMF dialing display appears.
>
Back to the call display
1
Character entry
2
To call up the phone book
3
Control systems
Z
163