compartment with LOGIC7
on.
The best sound results are achieved by
R
playing high-quality audio CDs and audio
DVDs.
For MP3 tracks, the bit rate should be at
R
least 128 kbit/s.
Surround sound does not function for
R
mono-signal sources.
In the event of poor radio reception
R
quality, e. g. inside a tunnel, you should
®
switch off LOGIC7
, as a dynamic switch
from Stereo to Mono could occur,
resulting in temporary sound distortion.
With some stereo recordings, the
R
resulting sound may deviate from
conventional stereo playback.
Switching off/on the audio source
i
When you insert an audio CD or audio
DVD, it automatically becomes the active
audio source.
X
Switching off: Select Audio
®
switched
Audio OFF.
£
The audio source is switched off; Audio
OFF appears in the display.
X
Switching on: Select Audio, then the
desired audio source.
or
X
Load CD/DVD (
card (
Y
page 200).
Audio
£
Y
page 198) or a PCMCIA
Control systems
COMAND system settings
COMAND system settings
System settings menu overview
i
The components and operating principles
of COMAND can be found on (
Y
page 78).
Z
91