Display; Blind Spot Assist; Messages In The Multifunction - Mercedes-Benz 2009 CL-Class Operator's Manual

Practical hints
Vehicle status messages in the multifunction display
Display messages
Blind Spot Currently
Assist Unavailable
See Oper. Manual
Blind Spot Inoperative
Assist
484
Possible cause/consequence
The Blind Spot Assist is deactivated
because the area around the sensors in
the front or the rear bumper is dirty.
The Blind Spot Assist is deactivated
because the battery voltage is insufficient.
The Blind Spot Assist is switched off
because the radar sensor system is
temporarily inoperative due to
electromagnetic interference near
television and radio transmitter stations,
toll stations, speed measuring systems,
etc.
The Blind Spot Assist is unavailable due to
a malfunction.
Possible solution
X
Clean the front and rear bumper
( Y page 465).
X
Have the battery checked at an authorized
Mercedes-Benz Center.
X
Wait until the message in the multifunction
display disappears.
X
Contact an authorized Mercedes-Benz Center
as soon as possible.