Panic Alarm - Mercedes-Benz 2009 CL-Class Operator's Manual

Safety and security

Panic alarm

X
Activating: Press override switch 1.
Indicator lamp comes on.
2
The rear side windows can no longer be
operated using the respective switch
located in the rear trim panels.
It is still possible to operate the rear side
windows using the switches located on the
door control panel of the driver's door.
X
Deactivating: Press override switch
again.
Indicator lamp goes out.
2
The rear side windows can again be
operated using the respective switch
located in the rear trim panels.
For more information on power windows, see
the "Controls in detail" section
( Y page 325).
64
Panic alarm
1
button
1 Â
i USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any
interference received, including
interference that may cause undesired
operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. this device must accept any
interference received, including
interference that may cause undesired
operation of the device.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
X
Activating: Press and hold button
least 1 second.
An audible alarm and flashing exterior
lamps will operate briefly.
X
Deactivating: Press button
or
X
Insert the SmartKey in the starter switch.
or
X
Press the KEYLESS-GO start/stop button.
The SmartKey with KEYLESS-GO must be
inside the vehicle.
for at
1
again.
1