Wheels; Battery; Tightening Torque - Mercedes-Benz 2009 CL-Class Operator's Manual

Wheel bolts
1 – 5
X
Tighten the five wheel bolts evenly,
following the diagonal sequence illustrated
(1 to 5), until all bolts are tight. Observe
a tightening torque of 110 lb-ft (150 Nm).
G Warning!
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque
of 110 lb-ft (150 Nm).
X
Fully collapse the jack, with handle folded
in (storage position), see ( Y
X
Store the jack and the other vehicle tools
in the designated storage space.
For information on storing the spare wheel
after it has been replaced by a regular road
wheel, see ( Y page 474).
i Do not restart the tire inflation pressure
monitor until a full size wheel/tire with
functioning sensor has been placed back
into service on the vehicle.
page 473).
Practical hints

Battery

Safety notes
A battery should always be sufficiently
charged in order to achieve its rated service
life. Refer to Maintenance Booklet for battery
maintenance intervals.
If you use your vehicle mostly for short-
distance trips, you will need to have the
battery charge checked more frequently.
When replacing a battery, always use a
battery approved by Mercedes-Benz.
If you do not intend to operate your vehicle
for an extended period of time, contact an
authorized Mercedes-Benz Center about
steps you need to observe.
G Warning!
Observe all safety instructions and
precautions when handling automotive
batteries.
Risk of explosion.
Fire, open flames and
smoking are prohibited
when handling batteries.
Avoid creating sparks.
Battery
Z
551