Comand Automatic Climate Control - Mercedes-Benz 2009 CL-Class Operator's Manual

COMAND automatic climate control

Introduction
i The components and operating principles
of COMAND can be found on (
G Warning!
Follow the recommended settings for
heating and cooling given on the following
pages and pages in the "Controls in detail"
chapter. Otherwise the windows could fog
up, impairing visibility and endangering you
and others.
You can operate the climate control via
COMAND or via the buttons on the climate
control panel ( Y page 385).
Some of the special climate control functions
can only be operated via COMAND.
The following climate control functions can
be operated via COMAND:
Temperature ( Y page 223)
R
Air distribution ( Y page 224)
R
Air volume ( Y page 224)
R
Switching off cooling (+)
R
( Y page 225)
Central climate control (Mono)
R
( Y page 226)
Footwell temperature (
R
Air flow from air vents (
R
The climate control menu is called up via the
climate control settings.
Y page 78).
Climate control settings with functions (submenus)
Temperature, driver's side
1
Air distribution, driver's side
2
Air volume, driver's side
3
Central menu, climate control
4
Air volume, passenger side
5
Air distribution, passenger side
6
Temperature, passenger side
7
COMAND automatic climate control
Y page 226)
Setting temperature
Y page 226)
G Observe Safety notes, see
page 387.
Use the temperature controls
( Y page 385) in the center console or
COMAND climate control settings to
separately adjust the air temperature on each
side of the passenger compartment.
X
Select climate control settings
Temperature, left or right and then press
n.
Control systems
®
£
Z
223