Mercedes-Benz 2009 CL-Class Operator's Manual page 166

Control systems
COMAND telephone
X
Sending individual characters: Rotate
or slide and select desired
ymz omp
character.
Each character you select can be seen in
the main area and is sent immediately.
X
Sending a phone book entry as a
character string: Select Name.
X
Select desired phone book entry.
The entry is immediately sent as a
character string.
i Telephone numbers containing the +
character may impair the function.
X
Switching back to the call display:
Select Y.
Sending character strings via the
telephone keypad
X
Press corresponding button on telephone
keypad.
Each character you select is immediately
sent.
i The + character may impair the function.
164
Ending an active call
X
Ending a call: Select 4END in the call
display.
or
X
Press on the telephone keypad or on
t
the multifunction steering wheel.
The COMAND display will change to the
previously selected display, if applicable.
Transferring a call
From the hands-free system to the
®
Bluetooth headset
®
i The use of a Bluetooth headset requires
®
Bluetooth to be activated and the
®
Bluetooth headset to be authorized
( Y page 180).
The call transfer is controlled by pressing the
®
PTT button on the Bluetooth
headset operating instructions). Normally, it
is sufficient to press the PTT button once, but
under certain circumstances you may have to
press it a second time.
Once the call has been transferred to the
®
Bluetooth headset, all the functions will be
available to you which are described in the
"Functions during a single-call connection"
section ( Y page 163).
Exception: "Switching the hands-free
microphone on or off" function
( Y page 163).
From the Bluetooth
hands-free system
On most Bluetooth
PTT button on the headset twice quickly to
transfer the call (see headset operating
instructions).
From the hands-free system to the
mobile phone
X
If the mobile phone has a folding upper
section: Flip upper section open.
X
Take mobile phone out of cradle.
The No telephone inserted message
appears on the COMAND display.
headset (see
Subsequent operation is only possible
using the mobile phone.
From the mobile phone to the hands-
free system
X
Insert mobile phone into cradle.
Once the call has been transferred to the
hands-free feature, all the functions will be
®
headset to the
®
headsets, you press the